~~NOTOC~~
======  Minute of meeting on 2019.02.06 ======
----

===== 1.  Attendees  =====

  * Bryan Fodness (Harris) \\
  * Christian M. Fuchs (Leiden University) \\
  * Dan Elftmann (Lockheed Martin) \\   
  * David Lee (Sandia Labs) \\   
  * Eliot Glaser (Northrop Grumman) \\      
  * Gary Swift (meeting moderator, Swift ERS) \\
  * George Miclea (Xilinx FAE) \\
  * Jeff George (The Aerospace Corporation) \\
  * Krzysztof Sielewicz () \\
  * Mike Wirthlin (BYU) \\
  * Munir Shoga (The Radiation Group) \\    
  * Patrick Fleming (Raytheon) \\
  * Richard Altstatt (SEAKR) \\
  * Ron Smith (Northrop Grumman) \\   
  * Sebastian Garcia (Slabs) \\
  * Stephen Thomas (Boeing) \\
  * Steve Pearl (General Dynamics) \\   
  * Victor Liau (Hughes Network Systems) \\


===== 2.  Topics covered =====

//NOTE: The following are very brief descriptions. Being this a Wiki, please complete/expand/correct them if you think we are missing interesting information (especially regarding anything important for future reference). 
//
//Paragraphs below are comments made by Gary (unless otherwise indicated).//


**Special presentation** next week: **Dr. Krzysztof Sielewicz** on his recent Kintex-7 testing.

**Special presentation** coming in a couple of weeks: **BYU** group's sharing new results, and current status of JCM-ConfigMon (SMap-32 port).


==== V7 DUT card development status ==== 
Layout routing right now, in charge of STS; to be preliminarly finished around Feb. 11th, and then perform final adjustments on trace lengths and the PDN.


==== V7 Going into the beam ====

Raytheon wanting to test 7-Series' MGTs in brief with the existing 980T "light" board. Patrick Fleming comments that he is trying to book in UCD's facility on April's first week.


==== KU060 DUT board development status ====
Not started, yet (BOEING design human resources unavailable). 

Stephen Thomas comments on an alternative plan to get to the beam. Boeing recently purchased some VCU108 Virtex UltraScale -based boards (device: XCVU095). 
Anthony Le has been in discussions with JPL; gonna try to get some boards' DUT thinned and try to get in the beam around March/April, with the goal to test the 16 Gb/s SERDES on UltraScale technology.

==== ZU+ latchup suppression experiment ====
Someone will need to travel to White Sands for delidding the parts in-place. 



